Collect Loyalty Points and Save when you Buy Online!

Firestone Water Based Adhesive 5Ltr WBA-3781 EPDM to Timber

£69.97 (inc. VAT)
For bonding membrane to OSB, timber, plywood or suitable insulation panels.
(coverage 5m² per litre)
You will earn 69 points with this purchase

Firestone Water Based Adhesive 5 LtrEPDM to Timber



Firestone Water Based Adhesive WBA-3781 is designed for bonding Firestone EPDM to Timber surfaces.


Bonding surfaces must be clean, dry, smooth, free of sharp edges, loose and foreign materials, oil, grease and any other contaminents.


Stir adhesive thoroughly before and during use. Use only when temperatures will not fall below freezing at anytime 24 hours after mating of EPDM..

Apply WBA-3781 over plywood orOSB substrates with a solvent resistant roller, taking care to completely cover the substrate evenly to avoid globs and puddles of adhesive. The EPDM may be Wet-mated to the coated plywood or OSB by rolling the membrane in place over the substrate. To ensure proper adhesion, compress the bonded portion of the sheet to the substrate with a stiff broom or heavy roller, such as a linoleum roller.


Coverage Rate – Wet Applied to Timber Deck

5L Tub – approx 18 – 20 sq/m

19L Tub – approx 75 – 78 sq/m


Store in original containers at temperatures between 15 – 25 degrees. Keep From Freezing

Shelf life – 18 months, when stored in above-mentioned conditions


May cause mild transient eye irritation. Avoid contact with eyes, skin and clothing. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If consumed, seek immediate medical attention. Keep container closed when not in use. Keep out of reach of children.

Firestone Water Based Adhesive Must Be Used Onto Timber

product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review